| System |
|
Form Factor |
2U Rackmount |
|
Chassis Model |
GN70 |
|
Dimension (D x W x H) |
27.56" x 17.72" x 3.43" (700 x 450 x 87mm) |
|
Motherboard |
S7086GM3NRE |
|
Gross Weight |
25 kg |
|
Board Dimension |
EATX, 12"x13" (305x330mm) |
| Front Panel |
|
Buttons |
(1) RST / (1) ID / (1) PWR w/ LED |
|
LEDs |
(1) PWR / (1) ID / (1) Warning / (3) LAN |
|
I/O Ports |
(2) USB 2.0 ports |
| External Drive Bay |
|
Type / Q'ty |
3.5"/2.5" Hot-Swap / (8) |
|
HDD backplane support |
SAS 12Gb/s /SATA 6Gb/s |
|
Supported HDD Interface |
(6) SATA 6Gb/s + (2) NVMe |
| System Cooling Configuration |
|
FAN |
(4) 6cm fans |
| Power Supply |
|
Type |
ERP1U |
|
Input Range |
100-127V AC/8A / 200-240V AC/4A |
|
Frequency |
50/60 Hz |
|
Output Watts |
770 Watts |
|
Efficiency |
80 plus gold |
|
Redundancy |
1+1 |
|
Serviceability |
Hot-swap |
| Processor |
|
Socket Type / Q'ty |
LGA2011 / (2) |
|
Supported CPU Series |
Intel Xeon Processor E5-2600 v3/v4 product families |
|
Thermal Design Power (TDP) wattage |
Max up to 145W |
|
System Bus |
Up to 9.6/ 8.0/ 6.4 GT/s with Intel QuickPath Interconnect (QPI) support |
| Chipset |
|
PCH |
Intel C612 |
| Memory |
|
Supported DIMM Qty |
(8)+(8) DIMM slots |
|
DIMM Type / Speed |
RDIMM DDR4 2400/2133/1600 / LRDIMM DDR4 2400/1866 / LRDIMM 3DS DDR4 2400/1866 (*Up to 2400 speed support only w/E5-2600 v4) |
|
Capacity |
Up to 512GB RDIMM/ 1,024GB LRDIMM/ 2,048GB LRDIMM 3DS *Follow latest Intel DDR4 Memory POR |
|
Memory channel |
4 Channels per CPU |
| Expansion Slots |
|
PCI-E |
(2) sets of the following expansion combination: / (1) PCI-E Gen3 x16 slot (w/x16/8 link)+(1) PCI-E Gen3 x8 slot (w/x0/8 link)+(1) PCI-E Gen3 x8 slot |
|
Pre-install TYAN Riser Card |
M7056-L24-3F / M7056-R24-3F |
|
NOTE: |
(1) OCP slot for Mezz Card / (1)Proprietary slot for SAS Mezz Card / (2) PCI-E Gen3 x4 MiniSAS HD for NVMe devices(TYAN Proprietary) |
|
Recommended TYAN OCP Card |
M7062-B811-1T, PCI-E Gen3 x8, Broadcom 10GbE Mezz Card / M7062-B810-2T, PCI-E Gen3 x8, Broadcom 10GbE Mezz Card / M7076-X540-2T, PCI-E Gen3 x8, Intel 10GbE Mezz Card / M7076-I350, PCI-E Gen3 x8, Intel (2)GbE Mezz Card / M7062-I599-1T, PCI-E Gen3 x8, Intel 10GbE Mezz Card / M7062-I599-2T, PCI-E Gen3 x8, Intel 10GbE Mezz Card |
| LAN |
|
Port Q'ty |
(3) GbE ports |
|
Controller |
Intel I350-AM2 / Intel I210-AT |
| Storage |
SATA |
Connector |
(1) Mini-SAS (4-ports) + (2) SATA (totally support 6 ports) |
| Controller |
Intel C612 |
| Speed |
6.0 Gb/s |
| RAID |
RAID 0/1/10/5 (Intel RSTe) |
| sSATA |
Connector |
(1) Mini-SAS (4-ports) |
| Controller |
Intel C612 |
| Speed |
6.0 Gb/s |
| RAID |
RAID 0/1/10/5 (Intel RSTe) |
| Graphic |
|
Connector type |
D-Sub 15-pin |
|
Resolution |
Up to 1920x1200 |
|
Chipset |
Aspeed AST2400 |
| I/O Ports |
|
USB |
(4) ports (2 at front, 2 at rear) |
|
COM |
(1) DB-9 COM port |
|
VGA |
(1) D-Sub 15-pin port |
|
RJ-45 |
(3) GbE ports (1 port shared with IPMI) |
| System Monitoring |
|
Chipset |
Aspeed AST2400 |
|
Temperature |
Monitors temperature for CPU & memory & system environment |
|
Voltage |
Monitors voltage for CPU, memory, chipset & power supply |
|
LED |
Over temperature warning indicator / Fan & PSU fail LED indicator |
|
Others |
Chassis intrusion detection / Watchdog timer support |
| Server Management |
|
Onboard Chipset |
Onboard Aspeed AST2400 |
|
AST2400 IPMI Feature |
IPMI 2.0 compliant baseboard management controller (BMC) / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub |
|
AST2400 iKVM Feature |
24-bit high quality video compression / 10/100 Mb/s MAC interface |
| BIOS |
|
Brand / ROM size |
AMI / 16MB |
|
Feature |
Hardware Monitor / SMBIOS 2.7/PnP/Wake on LAN / PXE boot support / ACPI 3.0/ACPI sleeping states S1,S4,S5 |
| Operating System |
|
OS supported list |
Please refer to our AVL support lists. |
| Regulation |
|
FCC (DoC) |
Class A |
|
CE (DoC) |
Class A |
|
C-Tick |
Class A |
|
VCCI |
Class A |
|
CB/LVD |
Yes |
| Operating Environment |
|
Operating Temp. |
10° C ~ 35° C (50° F~ 95° F) |
|
Non-operating Temp. |
- 40° C ~ 70° C (-40° F ~ 158° F) |
|
In/Non-operating Humidity |
90%, non-condensing at 35° C |
| RoHS |
|
RoHS 6/6 Compliant |
Yes |
